网站导航

常见问题

当前位置:主页 > 常见问题 >

万能铣床的铣刀如何修磨

时间:2020-08-26 21:54 点击次数:

万能铣床的铣刀的常用4种铣刀类型,以其中的一种类型说说铣刀的修磨方法:

万能铣床铣刀的常见类型,分为四种,分别为:面铣刀、力铣刀、三面刃铣刀、螺纹铣刀等,铣刀在各个铣床中的作用是非常大的,它就像一把利刃,能将一个个的待加工的产品完美雕琢。

万能铣床立铣刀端刃修磨方法:

把原刀架工作台换成立铣刀刃磨附件的工作台。将R8弹性套筒刺进铣刀附件工作台的锥形孔中,将直径尺度巨细适宜的立铣刀刺进R8套筒并将它固定,因而螺旋立铣刀将不再滚动。将立铣刀刀具调整到高于砂轮的基地。

按万能铣床铣刀侧刃后角的度数滚动0-40度的刀架工作台,使立铣刀的附件工作台调整出适宜的刃磨视点。用螺旋立铣刀刃磨附件上的导向可调支架固定槽针去贴紧立铣刀侧刃螺旋沟槽进行导向引导,然后直接早年到后自在旋转(靠导向引导)推进手把有些的前后抽动磨削办法刃磨铣刀后角的螺旋刃口。当主后角磨完后就磨副后角,将导向可调支架固定槽针刺进第二倾斜度的螺旋槽中,然后象磨榜首倾斜度相同去磨。

掌握铣刀的研磨方法,对于万能铣床的使用能起到事半功倍的效果,可以提高铣床的加工生产效率,更好的为生产服务。

 

 

There are four types of milling cutter commonly used in universal milling machine. One of them is about the grinding method of milling cutter

The common types of universal milling cutter are divided into four types: face milling cutter, force milling cutter, three side edge milling cutter, thread milling cutter, etc. the function of milling cutter in each milling machine is very big. It is like a sharp edge, which can perfectly carve the products to be processed one by one.

End milling cutter end grinding method of universal milling machine:

Replace the original turret table with the one for milling cutter grinding accessories. The R8 elastic sleeve is inserted into the conical hole of the milling cutter accessory table, and the end milling cutter with suitable diameter and size is inserted into the R8 sleeve and fixed, so the spiral end mill will not roll any more. Adjust the end mill tool to a base higher than the grinding wheel.

According to the degree of the back angle of the milling cutter side edge of the universal milling machine, roll the tool rest table of 0-40 degrees to adjust the appropriate grinding point of the end mill's accessory table. The screw end mill is used to grind the guide adjustable bracket fixed slot needle on the accessory to close to the spiral groove of the end mill side edge for guiding and guiding, and then the screw edge of the back corner of the milling cutter is grinded by the forward and backward twitch grinding method of pushing the handlebar freely from the early years to the back. After grinding the main rear angle, grind the rear angle of the pair, needle the fixed groove of the guide adjustable bracket into the spiral groove with the second inclination, and then grind it with the same inclination as the top of the grinding table.

Master the milling cutter grinding method, for the use of universal milling machine can play a multiplier effect, can improve the milling machine processing production efficiency, better service for production.

 


大家都在看的产品

电话:13280489678

QQ:675609587

邮箱:675609587@qq.com

联系人:郑经理

地址:山东省枣庄市滕州市经济开发区

Copyright © 山东沈北数控机床有限公司 版权所有 备案号:鲁ICP备20014639号-1

在线客服 联系方式 二维码

服务热线

13280489678

扫一扫,关注我们